The pipe fittings are an integral part of industrial and commercial areas. With the piping, the network comes other essential components too. It is important to know completely about the piping network and the components used in it so that future mishappenings or problematic situations could be avoided. Are you wanting to know about the welded pipe fittings and what to look for in the long radius elbows or pipe fittings before choosing them for your purpose? Also, if you are wanting to know about the pipe elbows and their uses then, this blog is all you need. Let us dive deep into the topic for a better understanding of the topic.
Welded Pipe Fittings
Pipe fittings are used to connect pipes of the same size or different sizes. Pipe fittings are an essential part of the plumbing system as they regulate or divert the flow of the pipe. Various types of pipe fittings are used in specific areas to meet the requirements. The material of the pipe fittings should be compatible with the pipe material, nature of liquid flowing, pressure and temperature both inside and outside of the pipe. Pipe fittings are available in different materials and sizes in the marketplace so people can have a variety of options and do not compromise with their needs. Pipe fittings are available in different materials such as brass, copper, steel, etc. Pipe fittings are used to make the piping system flexible and complete for branching off the connection. Welded pipe fittings are produced by welding the ends of the required components. The most common technique of producing welded pipe fitting is butt welding. Buttwelding fitting suppliers in India or any other country provide the best quality products. These fittings are available in stainless steel or carbon steel materials. Welded pipe fittings are considerably less expensive than the fittings produced by any other method. This is why people are more inclined towards buying welded pipe fittings. People find them pocket-friends and also are satisfied with the functions and qualities these fittings exhibit.
There are different kinds of fittings available such as valves, reducers, tees, flanges, elbows, etc. Each fitting has its distinctive function to perform, which makes the plumbing system more definitive and qualitative.
Types of Elbows
Pipe elbows are industrial fittings that are generally used to change the direction of liquid or flow of the liquid travelling through the pipes. Elbows are available in two angles, i.e 90-degree elbow and 45-degree elbow. Elbows are usually threaded to the pipes i.e. female threads or else they are welded to produce a perfect shape. Elbows are mainly of two types depending upon their length and radius, i.e long elbow radius and short radius elbow. There are other types of elbows too such as ss reducing elbows, male pipe elbow and female pipe elbow, socket weld elbow, butt weld elbow, threaded elbow, etc. Elbows usually change the direction or angle of the pipe, they are fabricated in different angles and dimensions as per their requirements. There are several butt welding manufacturing companies in India, the USA, Spain, etc. where you can seal the best deals for long radius elbows.
Long Radius Elbow and its uses
The long radius elbow has an angle of 90 degrees, so does the short radius elbow has. Long radius elbow has a bend radius of 1.5 D, i.e Normal size of the pipe. A long radius elbow is used because the pressure drop is less as compared to the short radius elbow. Thus, pipe rigidity will be reduced. Long radius elbows are available in different materials such as acrylonitrile butadiene styrene(ABS plastic), polyvinyl chloride(PVC), chlorinated polyvinyl chloride(CPVC) and copper. These material elbows are used mainly in sewage and central vacuum systems.
Long radius elbows are used in low-pressure gravity-fed systems and other applications where low turbulence and minimum deposition of entrained solids are of concern.
Standardisation and certification
The most important factor to look for in a product other than cost is its certification. It is mandatory to check if the product is up to the mark and this can only be examined if you check for the standardisation of the product. This marks the quality of the product and ensures long-lasting, better performance. To achieve a certain certification, a product is tested differently in multiple stages, if it passes the tests, only then it is provided with a certain certification. ANSI/ASME B16.9 is the certification given to premium quality long radius elbows. This certification is provided after checking for the functioning and durability of the long radius elbow. Long radius elbow with this certificate promises premium quality and outstanding outcomes as per the set international standards.
Conclusion
Long Radius Elbows are used in multiple areas due to their versatility and efficiency to redirect the flow of the pipe. It is also important to check for its maintenance from time to time, so it can have improved performance over and over. They come in different materials and are used as per their requirement in specific areas. Gautam Industry has an expertise in fabricating engineering products and services. We have customers from India and across the world. We help you establish reliable connections with suppliers and manufacturers, so you can get premium-quality goods and services at your doorstep. We will help you find buttweld fittings suppliers and manufacturers in India, the USA, Spain, UAE, etc that promise nothing but the best quality and on-time deliveries.
